DEUTZ-FAHR AGROTRON 106 MK3, Workshop Manual

Page: 142 / 150

20-24
MK 3 TTG Parameter Unit Min. Max.
typ
Wert
Description
Page 7: Monitoring
CoolTempMon.:
ShutoffValue
°C -30 130 118 Limit engine shutoff (130° = none)
CoolTempMon.:
Shutoff Delay
s 0 600 0 Time delay engine shutoff
CoolTempMon.:
RecovValue
°C -30 130 110,0 Reset limit
CoolTempMon.: Fuel qty red. % 0 100 20 Fuel inj. quantity reduction (0% = none)
CoolTempMon.: Red. delay s 0 600 15 Time delay fuel inj.quantity reduction
CoolTempMon.: Alarm limit °C -30 130 113 Limit alarm
OilPrMonitor: shutoff fact % 0 100 80 Factor for limit engine shutoff (0% = none)
OilPrMonitor:
shutoff delay
% 0 100 20 Time delay engine shutoff
OilPrMonitor:
recov fact
% 0 100 20 Factor for reset value
OilPrMon.:
Power Red. delay
s 0 600 15 Time delay fuel inj. quantity reduction
Engine speed position
valuesp
1/min
500...260
0
8 Engine speed values
Oil pressure warning bar 0...0,5 Oil pressure warning limit=fct(speed)
Page 9: Sensor calibration values
The following values are dependent only on the type of sensor used and consequently do not generally need to be changed.
BPSensor: upper err limit digits 0 1023 820 Boost pr. sensor: upper failure trigger point
BPSensor: upper ref (2 bar) digits 0 1023 454 Boost pr. sensor: voltage at 2 bar
BPSensor: lower ref (1 bar) digits 0 1023 219 Boost pr. sensor: voltage at 1 bar
BPSensor: lower err limit digits 0 1023 60 Boost.pr. sensor: lower failure trigger point
OilPrSens.:upper err limit digits 1023 820 Oil pr. sensor: upper failure trigger point
OilPrSens.:upper ref (5 bar) digits 0 1023 511 Oil pr. sensor: voltage at 5 bar
OilPrSens.:lower ref (0 bar) digits 0 1023 102 Oil pr. sensor: voltage at 0 bar
OilPrSens.:lower err limit digits 0 1023 40 Oil pr. sensor: lower failure trigger point
CoolTempSens.:up. err limit digits 0 1023 1020 Coolant temp. sensor: upper failure trigger point
CoolTempSens.:lo. err limit digits 0 1023 10 Coolant temp. sensor: lower failure trigger point
LowerMapBranch
TempSensor
digits 0 26...394 4 values
UpperMapBranch
TempSensor.
digits 64...838 6 values
Page 10: Setpoint gen. calibration values
T1:setpoint sensor 0 255 2 Smoothing time constant SWG
The following 8 parameters can be set with the menu ”Calibration”, see 4.3. - *SWG = setpoint sensor
AccPedal(SWG1)up. err val. digits 0 65535 963 SWG1: upper failure trigger point
AccPedal(SWG1)up. ref. digits 0 65535 922 SWG1: voltage max. position
AccPedal(SWG1)lo. ref. digits 0 65535 103 SWG1: voltage min. position
AccPedal(SWG1)lo. err val. digits 0 65535 62 SWG1: lower failure trigger point
Hand thr. (SWG2)up. err val. digits 0 65535 961 SWG2: upper failure trigger point
Hand thr. (SWG2)up. ref. digits 0 65535 830 SWG2: voltage max. position
Hand thr. (SWG2)lo. ref. digits 0 65535 190 SWG2: voltage min. position
Hand thr. (SWG2)lo. err val. digits 0 65535 61 SWG2: lower failure trigger point
SERDIA PARAMETERS