20-12
1)
As a printout. A suitable printer driver has to be selected under Windows. At the top of all printouts, the logistical data
appear:
•
Type of ECU
•
Date and time
•
Interface serial number
•
Engine number
•
Part number functional data set
•
Number of operating hours
2)
The ECU data can also be stored as a file. This file can be further processed in Excel.
The following table gives an overview of the possibilities for storing data from the various screens:
•
as printable files for further processing, e.g. in Excel
•
as configuration files to report changes
•
as a graphic file (*.egr) readable in the SERDIA demo mode.
1.10 PROTOCOL (PROTOKOLL)
This switch is only provided within the scope of development for configuration of the interface.
1.11 END COMMUNICATION
1.11.1 PROGRAM END
Before you disconnect the notebook from the engine ECU, you should return to the main menu and click on "Close".
If you have modified any parameters, in many cases it is worth checking the current parametrization, for safety's sake.
Proceed by carrying out the following steps:
1.
End SERDIA
2.
Switch off engine power supply, and then switch on again
3.
Start SERDIA again
4.
Re-activate the ECU
5.
Activate the menu point “Parameters”
6.
Click on -> PC” (“SG -> PC”) in the configuration screen.
7.
To print out the configuration data, press "Print" (“Print ON”).
8.
File the printout with the engine documentation
1.11.2 DISCONNECTING THE ECU
You should only disconnect the engine ECU from the notebook (i.e. interface with cable) after you have left the program
SERDIA by pressing "Close".
From screen
Button
Extension
Notes
Service Diagnosis
Print (File)
*. Ecu
for further processing, e.g. in Excel
Actual measured values
File
*. Msw
for further processing, e.g. in Excel
Graphics
( ASCII )
*. Agr
for further processing, e.g. in Excel
Graphics
( binario )
*. Egr
readable in the SERDIA demo mode
Input/output assignment
Print (File)
*. Ino
for further processing, e.g. in Excel
Configuration
Print (File)
*. Kfg
for further processing, e.g. in Excel
Configuration
Save in file
*. Hex
Configuration file
(partial data set, level-dependent)
Overall programming
ECU -> File
*. Hex
Configuration file
(complete data set, Level III and Ilia)
Error memory
Print (File)
*. Err
for further processing, e.g. in Excel
Logistical data
Print (File)
*. Dat
for further processing, e.g. in Excel
SERDIA
ENTRY AND COMUNICATION
Summary of Contents for AGROTRON 106 MK3
