DEUTZ-FAHR AGROTRON 106 MK3, Workshop Manual

Page: 133 / 150

20-15
Collect, time:
The duration of the recording appears in the field ”Collect. time”, in seconds. The lowest value for the dura-tion
of recording is one second. The upper measurement time can be entered as several hours (expressed
in seconds). The basic setting is 10 s. The shortest scanning rate is:
• 40 ms for RAM values
• 60 ms for the other values.
A measurement duration of 10 s gives
• 250 measuring points (10000 ms / 40 ms) with RAM values
• 166 measuring points (10000 ms / 60 ms) with the other values.
Since the program can cover a maximum of approximately 2000 measuring points, before data recording
starts the scanning rate is adjusted automatically as necessary.
The lowest possible scanning rate is determined by the duration of the data transfer from the ECU to the
PC. The more variables are to be displayed at the same time, the longer the data transfer will take and the
lower the scanning rate will be.
File: The current measured values can be stored in a file and reloaded later, for example for further processing in Excel.
Print: The displayed measured values are printed.
Close: Return to the main window "Service diagnosis".
3.1.1 MEASURED VALUE SELECTION
Figure: Measured value selection EMR
In this list you can activate or deactivate measured values for display. You can activate and deactivate individual values by
clicking on the check box; alternatively you select all the values by using one of the switches described below.
Save: The measured values displayed are saved to a file.
Load: A selected measured value is entered from a file.
Delete selection: All measured values are deactivated for display.
Select all: All measured values are activated for display.
OK: The updated measured value selection is adopted and the program returns to a display of the current measured val-
ues.
Cancel: The program returns to a display of the current measured values. Updates to the measured value selection are re-
jected.
SERDIA MEASURED VALUES