Denyo DCA-600P, Instruction Manual

Page: 56 / 58

- 54 -
7. PRINCIPAL DATA
7-1 Readings on gauges
Marking Reading Unit
Engine speed 1500 / 1800 min
-1
Hour meter Adding up H
Engine temperature below 95 °C
Engine oil pressure Between 2.0 and 6.0
1)
x100kPa
Battery charging voltage
more than 26.0
V
Frequency 50 / 60 Hz
Load current Below max. rating A
Voltage indicates
Phase-to-phase
voltage
V
1)
If the engine is cold, the pressure may be higher during starting.
7-2 Setting of switches
Switch Function Breaks at Unit
Engine oil pressure Alarm 3.0 ×100kPa
Shut-down 2.0 ×100kPa
Engine coolant temperature Alarm 108 °C
Shut-down 108 °C
Engine coolant level Shut-down Coolant level
is low
Engine Overspeed Shut-down 2140 min -1
7-3 Reference conditions
Absolute inlet pressure………………………………………………………... 100kPa
Relative air humidity…………………………………………………………... 60%
Air inlet temperature…………………………………………………………....27°C
Generator load……………………………………………………………….....continuous
7-4 Limitations
Maximum ambient temperature……………………………………….......... 46°C
Maximum altitude……………………………………………………………… 1000m Maximum relative
air humidity………………………………………….................................…...85%