Denyo DCA-600P, Instruction Manual

Page: 13 / 58

- 11 -
1. Operation switch
The switch is 2-position switch which can be operated with its specific key only.
1) OFF/STOP
This switch should be set in this position unless the machine is in operation.
The key can be inserted or pulled out in this position.
2) RUN
This switch should be set in this position when the machine is in operation.
In this position, the preheating system is energized.
2. Start button
This button keep on pushing to start the engine.
3. Emergency stop button
The stop button is a push button to stop the engine in case of an emergency.
When the button is pressed, it must be unlocked by turning it anti-clockwise
before the engine can be re-started.
4.Speed regulator
Turn the switch toward the “HIGH” side to increase the speed and toward the
“LOW” side to decrease it.
RUN OFF/STOP
OPERATION SWITCH
RUN OFF/STOP
OPERATION SWITCH
KEEP ON PUSHING
TO START ENGINE .
START BUTTON
EMERGENCY STOP BUTTON IS RESET
BEFORE STARTING , CHECK
RESET
EMERGENCY STOP BUTTON
HIGH
LOW
SPEED REGULATOR