Denyo DCA-600P, Instruction Manual

Page: 31 / 58

- 29 -
3. OPERATION
3-1 Safety precautions for operation
DANGER
• When the machine is running, never touch output terminals, internal wiring or other electrical
parts.
• Do not use the machine in a humid place. An excessive humidity is very dangerous.
Never touch the machine if the machine or your body is wet.
• The electrical connections shall comply with the local regulations.
• Use cables which are not damaged. Make sure that all electrical connections are securely
fastened. Damaged cables or loose connections might cause electric shocks.
WARNING
• The engine exhaust gas is lethal and toxic. Do not operate in places where the aeration is poor.
Discharge the exhaust by a ventilation facility. Do not direct the engine exhaust towards passers-
by, residences, etc.
• Do not operate the machine in an atmosphere containing toxic or combustible gas. Otherwise,
fire or explosion might occur in the machine. (Example: Near volatilizing paint solvent.)
• Do not refill fuel or oil while the machine is running but after stopping the engine.
• Fuel and oil are combustible and undiluted anti-freeze solution is inflammable. Do not smoke
while handling or refilling them. Do not get fire or heated object near them.
• Do not spill or leave fuel, oil, anti-freeze solution or cleansing agent in or around the machine.
• Never remove the cover of the output terminals during operation. Before connecting or
disconnecting the cables, switch off the load and machine circuit breakers, stop the machine
and make sure that the machine cannot be started inadvertently.
• Eelectric shock by leak can kill.
Improper grounding may lead to death due to electric shock.
*Be sure to execute the grounding of the machine and the load according to the local rule.