Denyo DCA-600P, Instruction Manual

Page: 43 / 58

- 41 -
[ NOTE ]
: Operating Direct Injection (DI) diesel engines with fuel sulphur levels over
0.5 percent will require shortened oil change intervals in order to help maintain
adequate wear protection.
Percentage of Sulfur in the fuel Oil change interval
Lower than 0.5 Normal
0.5 to 1.0 0.75 of normal
Greater than 1.0 0.50 of normal
Fuel selection:
The following specific advantages are required for the diesel fuel.
1) Must be free from minute dust particles.
2) Must have adequate viscosity.
3) Must have high cetane value.
4) Must have high fluidity at low temperature.
5) Must have low sulfur content.
6) Must have little residual carbon.
Applicable Standard Recommendation
JIS (JAPANESE INDUSTRIAL STANDARD)
ASTM D975
BS2869-1997
BS EN590 1997
NO. 2
No. 1-D or 2-D
Class A-2
In fuel other than the specified one is used, engine function will be lowered.