Denyo DCA-600P, Instruction Manual

Page: 16 / 58

- 14 -
(4) Warning Lamps
This monitor indicates the following failures, if any one of them occurs.
①
High jacket water temperature (WATER TEMP)
This lamp goes on when the water temperature rises abnormally.
If the lamp goes on during operation, the emergency stop device
immediately operates to shut down the engine automatically.
②
Low lubricating oil pressure (OIL PRESS)
If this lamp goes on during operation, the emergency stop device
immediately operates to shut down the engine automatically.
(5) Hour Meter
  ①
When you turn the starter switch to “RUN” position, and push the selector button located
on the right side of the Hour Meter, you can see the numbers mentioned below;
• “ODO” Total running hour
• “TRIP A” Running hours “A” on a certain period
• “TRIP B” Running hours “B” on a certain period
 
②
If you want to reset the Trip Meters, push the selector button for more than 1 second,
after selecting each meters.