Denyo DCA-600P, Instruction Manual

Page: 15 / 58

- 13 -
(2) Fuel Level Indicator (Only with Fuel Tank)
That Indicates a fuel level in the fuel tank. All the lights are indicated green when the fuel
is full. The green lights stop indicating one by one as the fuel level decrease, finally the
red light will be indicated when it is only one green light is left. Replenish the tank when
there becomes only one lamp turned on. The table below shows the relation between
numbers of turn - on lamps and fuel level.
Numbers of lamps
turned-on
DCA-600P
Fuel level (L)
9
450 to full
8
405 to 450
7
345 to 405
6
295 to 345
5
245 to 295
4
195 to 245
3
165 to 195
2
120 to 165
1
0 to 120
(3) Alarm and Memory at Abnormal Condition
When any abnormal condition occurs in engine oil pressure, battery charging voltage,
or engine coolant temperature, the indication will change as the following;
1 - The Indicator shows its defect with blinking numbers.
2 - When the abnormal condition is corrected, the on - and - off indication will stop.
3 - If engine would stop urgently and automatically or stop manually with the abnormal
condition, the abnormal value will be memorized, and then indicated even after engine
is started again.
In this case, keep on pushing the button “RESET” for more than 5 seconds, and the
abnormal indication will be reset to normal.