63 69 149 D3561
D3561
.
076.01.07
.
02 02.2017
28
Dentsply Sirona
5 Important information
Service Manual Sinius / Sinius CS / Sinius TS
5.3 CAN BUS
båÖäáëÜ
5.3
CAN BUS
5.3.1
General
The CAN runs all controllers of the treatment center, all software updates,
and all service support cases.
On the S-COM, the PC software functions are performed for the user
interface and the user interface software is downloaded via FTP.
After the treatment center is switched on, all components and software
are queried and displayed in the setup dialog.
SETUP key
✔
All instruments are in place.
1. Hold down the
“Setup“
fixed key for at least 2 seconds.
Six setup dialogs are offered for selection.
2. Hold down the
“Service domain“
fixed key for at least 2 seconds.
The service domain is offered.
3. Tap the
"Info"
key.
The menu for selecting components appears.
4. Select the components for reading the version information one after
the other.
The corresponding information is displayed (in the following
example the information is from the dentist element)
