manualshive.com logo in svg

Dentsply Sirona SINIUS, Service Manual

Share
Download
Dentsply Sirona SINIUS Service Manual Download Page 158

 63 69 149 D3561

152

D3561

.

076.01.07

.

02 02.2017

9 Mechanical components

Dentsply Sirona

9.1 Setting brakes on the support arm and dentist element

Service Manual Sinius / Sinius CS / Sinius TS

9.1.5

Adjusting the LEDView / LEDview Plus brakes

9.1.5.1

Adjusting the brakes

Adjusting the brake on the support column

➢ Increasing brake force:

Using an Allen key turn the screw (I) inwards.

➢ Reducing brake force:

Using an Allen key turn the screw (I) outwards.

Adjusting other joint brakes

Adjusting the brake on the support arm

1. Increasing brake force at position (B): 

Using an Allen key turn the screw (C) inwards.

2. Reducing brake force at position (B): 

Using an Allen key turn the screw (C) outwards.

IMPORTANT

This brake is not preset. Adjust it to the required brake force.

I

IMPORTANT

The brakes listed here are preset 
➢ Only adjust these if this is required by the user. 

Summary of Contents for SINIUS



















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands