52
14. ANNEX
А
Manufacturer's manual and declaration – electromagnetic emission
These devices are intended for use in the electromagnetic environment specified below. The customer or the user of
the device should ensure its use in the specified electromagnetic environment.
Electromagnetic
emissions test
Compliance
Electromagnetic environment – instructions
Radio-interferences
according to Special
International Committee
for Radio-Electronic
Interferences 11
Group 1
The device uses radio-frequency energy only to perform internal
functions. The emission level of the radio frequency interference is low
and might not lead to disturbances in the functioning of the electronic
equipment located close to it
Radio-interferences
according to Special
International Committee
for Radio-Electronic
Interferences 11
Class B
The device is suitable for use in all the locations, including residential
buildings and buildings directly connected to a distribution network that
supplies residential buildings
The harmonic current
components
of IEC 61000-3-2
Class A
Voltage fluctuations and
flicker according
to IEC 61000-3-3
Complies
Table 1