OPERATING MANUAL
ENG
31
In case of osteochondrosis complicated by radicular syndrome, the treatment
is first applied onto the affected area of the spine, after which the device must be
turned off, wait for 10 minutes, a line of emitters is installed along the affected
nerve covering the nerve root and treat the second area, as shown in Figure 3.
• HUMEROSCAPULAR PERIARTHROSISIS
To correctly complete the procedure, it is necessary to arrange the line of four
inductors as follows: the first inductor to which the power cord is connected is
located on the front surface of the shoulder joint, the second overlaps back and is
installed on the side of the joint, the third inductor is located at the rear, and the
fourth inductor is extended towards the cervical spine, as shown in Figure 4.
Fig. 3. Application of inductors when treating
osteochondrosis complicated
by nerve root syndromes
Fig. 4. Application of inductors
when treating
humeroscapular periarthrosis