OPERATING MANUAL
ENG
15
In case the device was transported or stored for a long me at temperatures
below 10 °
С
,
fi
rst keep it at least 2 hours at a temperature in between 10 °
С
and
35 °
С
before turning on.
Ensure that there is no mechanical damage to the cable and the housing of the
device.
A en on!
Disinfection methods
Disinfect the external surfaces of the device before its first use and as required
from then on by double wiping with a coarse calico or gauze cloth moistened with
disinfectant solution approved for use in medical practice to protect the plastic
and metal items from dermatomycosis infection. Keep interval between wipings
according to the directions for use of disinfectant solution. Keep control unit and
emitter internals away from contacting with disinfectant solution. Next wipe the
surfaces with cloth moistened with water and then wrung-out, and dry at ambient
temperatures below +50 °
С
.
A 3% hydrogen peroxide solution and a 5% chloramine solution can be used
as a disinfectant solution.
7. PREPARATION FOR USE
!
DO NOT
use the device if any of the above damage occurs!