OPERATING MANUAL
ENG
23
When the device is powered on, the
Start/Stop button (« / ») LED starts
blinking to indicate that the device is on
and in waiting mode.
The device changes the mode into
normal operation mode upon brief
pressing any button. The «START/STOP»
button LED stops flashing, and 1-2-3 mode
indicator LEDs light on and off sequentially,
and then the LED corresponding to the
last previously set mode number (1, 2, or
3) lights up and a sound signal is heard
corresponding to the mode. The device is
now ready for operation.
Connect the power cord of the device to the 230 V power network outlet.
A en on!
Locate the device at the site comfortable for use. Avoid tension of
power cord and emi er cable. Only use working (fault-free) power
socket. Make sure that the mains power is supplied to the electronic
control unit.
!
Mode indication
«Mode Select» button
«START/STOP» button