Delta AH02HC-5A, Hardware Manual

Page: 212 / 229

Chapter 9 Troubleshooting
Error
Description Remedy
code
16#9A07
The setting of the data
exchange for slave 7 in the
PLC Link is incorrect.
(SM1590)
1. Check the program and the related special data
registers.
2. Set the PLC Link parameter in HWCONFIG
again.
16#9A08
The setting of the data
exchange for slave 8 in the
PLC Link is incorrect.
(SM1590)
1. Check the program and the related special data
registers.
2. Set the PLC Link parameter in HWCONFIG
again.
16#9A09
The setting of the data
exchange for slave 9 in the
PLC Link is incorrect.
(SM1590)
1. Check the program and the related special data
registers.
2. Set the PLC Link parameter in HWCONFIG
again.
16#9A0A
The setting of the data
exchange for slave 10 in the
PLC Link is incorrect.
(SM1590)
1. Check the program and the related special data
registers.
2. Set the PLC Link parameter in HWCONFIG
again.
16#9A0B
The setting of the data
exchange for slave 11 in the
PLC Link is incorrect.
(SM1590)
1. Check the program and the related special data
registers.
2. Set the PLC Link parameter in HWCONFIG
again.
16#9A0C
The setting of the data
exchange for slave 12 in the
PLC Link is incorrect.
(SM1590)
1. Check the program and the related special data
registers.
2. Set the PLC Link parameter in HWCONFIG
again.
16#9A0D
The setting of the data
exchange for slave 13 in the
PLC Link is incorrect.
(SM1590)
1. Check the program and the related special data
registers.
2. Set the PLC Link parameter in HWCONFIG
again.
16#9A0E
The setting of the data
exchange for slave 14 in the
PLC Link is incorrect.
(SM1590)
1. Check the program and the related special data
registers.
2. Set the PLC Link parameter in HWCONFIG
again.
16#9A0F
The setting of the data
exchange for slave 15 in the
PLC Link is incorrect.
(SM1590)
1. Check the program and the related special data
registers.
2. Set the PLC Link parameter in HWCONFIG
again.
16#9A10
The setting of the data
exchange for slave 16 in the
PLC Link is incorrect.
(SM1590)
1. Check the program and the related special data
registers.
2. Set the PLC Link parameter in HWCONFIG
again.
16#9A11
The setting of the data
exchange for slave 17 in the
PLC Link is incorrect.
(SM1590)
1. Check the program and the related special data
registers.
2. Set the PLC Link parameter in HWCONFIG
again.
16#9A12
The setting of the data
exchange for slave 18 in the
PLC Link is incorrect.
(SM1590)
1. Check the program and the related special data
registers.
2. Set the PLC Link parameter in HWCONFIG
again.
16#9A13
The setting of the data
exchange for slave 19 in the
PLC Link is incorrect.
(SM1590)
1. Check the program and the related special data
registers.
2. Set the PLC Link parameter in HWCONFIG
again.
9-17