Delta AH02HC-5A, Hardware Manual

Page: 184 / 229

C h a p t e r 6 M e m o r y C a r d
In addition, there is usually a write protect tab on the left side of a memory card. If the tab is slid
downward, data can not be written into the memory card. As a result, users have to make sure that
the tab is slid upward before they use the memory card.
Write-protected
Release
6.2.2 SD Slot in a CPU Module
t corner of the front of a CPU module.
6.2.3 Installing a Memory Card
odule, and push it downward until it clicks. After
d
As shown below, the SD slot is in the lower righ
z AHCPU500/510/520/530-RS2
z AHCPU500/510/520/530-EN
SD slot SD slot
Insert a memory card into the SD slot in a CPU m
the memory card is installed, it is fixed firmly in the slot. If the memory card is loose, it is not installe
correctly. Besides, the memory card has anti-misinsertion design. If it is inserted in the wrong
direction, it can not be pushed downward. To prevent the CPU module from being damaged, users
can not force the memory card in. The correct way to insert the memory card is shown below.
6 - 3