Delta AH02HC-5A, Hardware Manual

Page: 150 / 229

AH500 Hardware Manual
5.8.1.3 Installing the DeviceNet Connector
 After the wiring is complete, users can insert the DeviceNet connector into the interface.
 Tighten the two screws on the DeviceNet connector.
Note:
 After the communication cable is kept separate from the power cable, the electromagnetic
interference is reduced.
 Only after the both ends of the shielded cable are grounded can the shielded cable be brought
into full play.
5.8.2 Wiring AH10EN-5A
The RJ45 communication port
Pin Signal Description
1 TX+ Transmitting data +
2 TX- Transmitting data -
3 RX+ Receiving data +
4 -- N/C
5 -- N/C
6 RX- Receiving data -
7 -- N/C
8 -- N/C
5.8.3 Wiring AH10SCM-5A
The RS-485/RS-422 communication port
Pin RS-485 RS-422
1 N/C TX+
2 N/C TX-
3 D+ RX+
4 D- RX-
5 SG SG
6 N/C SG
5-37