Delta AH02HC-5A, Hardware Manual

Page: 146 / 229

AH500 Hardware Manual
5.6.5 Wiring AH06XA-5A
Shielded cable*1
Voltage input
-10 V~+10 V
Shielded cable*1
Current input
-20 mA~+20 mA
Shielded cable*4
Voltage output
-10 V~+10 V
Shieleded cable*4
Current output
0 mA~20 mA
An AC motor drive,
a recorder,
a proportioning valve...
An AC motor drive,
a recorder,
a proportioning valve...
converter
V0+
I0+
VI0-
CH0
V3+
VI3-
CH3
*3
*2
CH0
1M
CH3
AG
1M
1M
AG
1M
250
250
VO1
IO1
AG
CH1
CH1
AG
VO0
IO0
AG
CH0
*5
CH0
AG
ZP
UP
DC24V
DC/DC
+15V
-15V
AG
SG
*6
*7
*6
*6
*6
SG
SG
SG
SG
*1. Please isolate the analog input signal cables from other power cables.
*2. If the module is connected to a current signal, the terminals V+ and I+ have to be short-circuited.
*3. If the ripple in the input voltage results in the noise interference with the wiring, please connect
the module to the capacitor having a capacitance within the range between 0.1 μ F and 0.47 μ F
with a working voltage of 25 V.
*4. Please isolate the analog output signal cables from other power cables.
*5. If the ripple is large for the input terminal of the load and results in the noise interference with the
wiring, please connect the module to the capacitor having a capacitance within the range
between 0.1
μ F and 0.47 μ F with a working voltage of 25 V.
*6. Please connect the shielded cables to the terminal SG.
*7. Once AH06XA-5A is installed on a backplane, the terminal SG on AH06XA-5A and the terminal
on the backplane will be short-circuited. Please connect the terminal on the backplane
to the ground terminal .
5-33