Delta AH02HC-5A, Hardware Manual

Page: 102 / 229

AH500 Hardware Manual
3.10.2 Profiles

AHRTU-DNET-5A
x10
1
x10
0
N od e A ddr e ss
D R 1
D R 0
IN 1
IN 0
1
2
3
4
7
6
8
9
11
10
5
Number Name Description
1 Model name Model name of the module
2
Seven-segment
display
Display
3 Address knob Setting the address
4 Function switch Setting the functions
5 DeviceNet connector
DeviceNet is used to interconnect control devices for data
exchange.
6 MS LED indicator Indicating the status of the module
7 NS LED indicator Indicating the status of the network
8 Label Nameplate
9 Set screw Fixing the module
10 Connector Connecting the module and a backplane
11 Projection Fixing the module

The address knobs
It is used to set the node address of AHRTU-DNET-5A on a DeviceNet network. (Node
addresses range from 0 to 63.)
Setting Description
0…63
Available nodes on a DeviceNet
network
64…99
Unavailable nodes on a
DeviceNet network
Example: If users want to set the communication address of AHRTU-DNET-5A to 26, they can
turn the knob corresponding to x10
1
to 2, and turn the knob corresponding to x10
0
to
6.
Note:
1. When the power supply is cut off, the node address is set. After the setting of the node
address is complete, AHRTU-DNET-5A can be supplied with power.
2. If AHRTU-DNET-5A is running, changing the node address is unavailable.
3. Please use a slotted screwdriver to turn the knobs with care, and do not scrape them.
3-71