HARNAIS HAxxx / ELARAxxx DATE : 14/03/2017 17/80
B.P. 140 - ZAC de La Peyrolière
84405 APT CEDEX - FRANCE
- Correct operation and locking of connectors
Specific conditions such as humidity, snow, ice, mud, dirt, paint, oil, glue, corrosion, wear of the strap or rope, etc.. can significantly
reduce the operation of the fall arrest device.
2 / in the following cases:
- Before and during use - if in doubt
- In the case of contact with chemicals, solvents or fuels that could affect operation
- If it has been subjected to stress during a previous fall
- At least every twelve months by the manufacturer or a competent organization, mandated by them.
PERIODIC REVIEW OF PPE:
An examination should be performed at least every twelve months by the manufacturer or a competent organization, mandated by
them. This very important check is related to the maintenance and efficacy of the PPE and hence the user's safety. A written
document authorising reuse should be obtained during this audit in order to reuse the PPE. This document will clarify that the user's
safety is linked to maintaining the efficiency and resistance of the equipment.
Replace the PPE if necessary.
In accordance with European regulations, the identification form must be completed prior to the first use of the product and then
updated and kept with the product as well as the manual by the user. The legibility of the product labelling should be checked
periodically.
WARNING:
The user's safety depends on the continuing efficacy of the PPE, its strength and the proper understanding of the instructions in this
manual.
WARNING: Any static or dynamic overload may damage the PPE.
WARNING: The weight of the user, including his clothing and equipment must not exceed the maximum weight indicated on the fall
arrest
It is dangerous to create your own fall arrest system as each safety function may interfere with another safety function.
No modification or addition or repair of the PPE may be made without prior written consent from the manufacturer without using their
procedures.
Do not use beyond the scope of use defined in the usage instructions, nor beyond its limits.
The manufacturer cannot be held liable for any direct or indirect accident after a modification or use other than that provided in this
manual.
This equipment should be used in work environments with minimum temperatures of -20°C / maximum of +50°C. (See reference
table).
FEATURE OUTSIDE OF STANDARD:
Some of these PPE have been tested with a mass constraint 40% / 50% higher than the standard requirements (at 140 kg / 150 kg) ,
see product marking.
STORAGE INSTRUCTIONS:
During transport and storage:
- keep the product in its packaging - keep the product away from any sharp, abrasive, objects etc...
- Keep the product away from sunlight, heat, flames, hot metal, oil, petroleum products, harsh chemicals, acids, dyes, solvents, sharp
edges and structures of small diameter. These items can affect the performance of the fall arrest device.
After use, store the product in its packaging in a cool, dry, ventilated area.
INSTRUCTIONS FOR CLEANING / MAINTENANCE:
Clean with soap and water, wipe with a cloth and hang in a ventilated area to dry naturally away from any direct fire or source of heat,
even for items that got wet during use.
MARKING:
- Manufacturer identification: DELTAPLUS®
- Date (month / year) of manufacture, e.g. 02/2016
- The product reference HA…ELARA… (See reference table).
- The batch number, e.g. 16.9999
- The indication of compliance with Directive 89/686/EEC (CE symbol)
- The number of the notified body involved in the regulation of equipment (0082 or 0333)
- The number of the standard to which the product is compliant and its year: EN…
- 2 free zones to indicating the user's name and that of his company
- Attachment points for fall arrest equipment: A, A/2
- Sizes: TM= XS, XXS, GT = S, M, L and XX = XL, XXL, XXXL
As well as the pictograms: ⑫ see diagrams. Read the instruction manual before use
PERFORMANCE / COMPLIANCE:
Compliance with the essential requirements of Directive 89/686/EEC, in particular in terms of design, ergonomics and safety. Meets
with requirements and test standards EN363, EN364, EN365, EN361, see product marking.
Some products have been tested at 140 kg / 150 kg according to EN361, see product marking.
Other detachable components :
Connector or vest or belt or shock absorber:
Follow the instructions described in their own manual.
