Dell Vostro 220 - Vostro 220 Slim Desktop Computer Service Manual Download Page 131

Page: 131 / 138

Safety Instructions

131

System Info

System Info

Lists system information such as the computer name, and
other system-specific information.

BIOS Info

Shows the BIOS version number and date information.

Service Tag

Displays computer service tag number for support
purposes.

CPU Info

Identifies whether the computer’s processor supports
Hyper-Threading and lists the processor type, processor
bus speed, processor ID, clock speed, and L2 cache.

Memory Info

Indicates amount of installed memory, memory speed,
channel mode (dual or single), and type of memory
installed.

Standard CMOS Features

Date/Time

Displays current date and time settings. Date (mm:dd:yy)

SATA Info

Displays the SATA drives integrated in the system (SATA
-0; SATA-1; SATA-2; SATA-3; SATA-4; SATA-5).

SATA Mode

AHCI by default

Halt On

All Error; All; But Keyboard. (All, But Keyboard by
default)

Advanced BIOS Features

CPU Feature

• SpeedStep

—

Enabled; Disabled (Enabled by default)

• Execute Disable Bit

—

Enabled; Disabled (Enabled by

default)

• Hyper-Threading

—

Enabled; Disabled (Enabled by

default)

• Core Multi-Processing

—

Enabled; Disabled (Enabled by

default)

• Intel(R) C-STATE tech

—

Enabled; Disabled (Enabled by

default)

Boot Up NumLock

Status

Off; On (On by default)

Quiet Boot

Enabled; Disabled (Enabled by default)

Boot Configuration

Summary of Contents for Vostro 220 - Vostro 220 Slim Desktop Computer











































































































































Search results

Summary of Contents for Vostro 220 - Vostro 220 Slim Desktop Computer

Reviews:

Related manuals for Vostro 220 - Vostro 220 Slim Desktop Computer

Brands by name

Popular brands

Dell Vostro 220 - Vostro 220 Slim Desktop Computer, Service Manual

Search results

Summary of Contents for Vostro 220 - Vostro 220 Slim Desktop Computer

Reviews:

Related manuals for Vostro 220 - Vostro 220 Slim Desktop Computer

Brands by name

Popular brands