manualshive.com logo in svg

Dell USC, User Manual

Share
Download
Dell USC User Manual Download Page 49

USC and USC-LCE Operations

49

4

For 

USC

 — Select the driver source. See 

Selecting Operating System 

Driver Source Location (for USC only)

 for more information.

5

Select the operating system from the list, insert the operating system 

media, and complete the remaining tasks. See 

Selecting Operating 

System

 for more information.

 

NOTE: 

If you select an operating system that supports UEFI boot mode, 

options–BIOS or UEFI are provided for selecting the boot mode.

6

Reboot the system. See 

Rebooting System

 for more information.

See Also:

•

Installing Drivers for RHEL 4.8 Operating System

•

Operating System–Post Installation Scenarios

•

Assigning a Windows-Bootable System Partition to Drive C

•

Installing Red Hat Enterprise Linux 4.8 on a System with SAS7 

(H200) Controller

Selecting Operating System Driver Source 

Location (for USC only)

For USC, download the operating system drivers from an 

Online Repository

 or 

a 

Local Drive

 (USB, network share, or DVD).

Online Repository

To download drivers from an online repository:

1

Select the 

Online Repository

.

2

Select the 

FTP Repository

.

3

Download the drivers using one of the following methods:
•

Dell FTP Server

•

Locally Configured Online Repository

•

Configuring Proxy Server

Summary of Contents for USC





































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands