manualshive.com logo in svg

Dell USC, User Manual

Share
Download
Dell USC User Manual Download Page 37

USC and USC-LCE Operations

37

4

USC and USC-LCE Operations

This section provides the tasks required to perform different operations on 

the Unified Server Configurator (USC) and Unified Server Configurator-

Lifecycle Controller Enabled (USC-LCE).

Viewing Hardware Inventory–Current or Factory 

Shipped

To view the currently installed or factory installed hardware components and 

their configuration:

1

From the left pane, click 

Hardware Configuration

.

2

Click 

View Current Inventory 

or

 View Factory Shipped Inventory

 to view 

the current or factory shipped inventory.

See Also:

•

About View and Export Current Inventory

•

About View and Export Factory Shipped Inventory

Exporting Hardware Inventory–Current or Factory 

Shipped

To export the currently installed or factory installed hardware components 

and their configuration:

Prerequisites

• If you use the network share, set the correct 

Network Settings

. See 

Using 

USC Settings Wizard

 for more information.

• If you are storing the exported file in an USB device, ensure that an USB 

device is connected to the managed node.

• If you are storing the exported file in network share, ensure that you have 

shared folder with the correct login credentials.

Summary of Contents for USC





































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands