98
USC and USC-LCE Operations
USB Device
1
From the left pane, select
Platform Restore
.
2
From the right pane, select
Import Server Profile
.
3
Select
USB Device
and click
Next
.
4
From the
Choose Device
drop-down menu, select the attached USB
device.
5
In the
File Location
text box, enter the directory or sub-directory path,
where the backup image file must be stored on the selected device. By
default, the file is stored in the root location of the device.
6
Select either
Preserve configuration
or
Delete Configuration
.
• Preserve configuration — Preserves the RAID level, virtual disk and
controller attributes.
• Delete configuration — Deletes the RAID level, virtual disk and
controller attributes.
7
If you have secured the backup image file with a passphrase, in the
Backup
File Passphrase
text box, enter the passphrase entered during backup and
click
Finish
.
Post-import Scenario
1
System powers off if turned on. If the system boots into an operating
system, it attempts to perform a graceful shutdown. If unable to, it will
perform a forced shutdown after 15 minutes.
2
System powers on and boot into System Services to execute tasks to
perform firmware restore for supported devices (BIOS, Storage Controllers
and Add-in NIC cards).
3
System reboots and goes into System Services to execute tasks for firmware
validation, configuration restore for supported devices (BIOS, Storage
Controllers and Add-in NIC cards) and the final verification of all tasks
executed.
Summary of Contents for USC
