manualshive.com logo in svg

Dell USC, User Manual

Share
Download
Dell USC User Manual Download Page 33

USC and USC-LCE Features

33

System or Feature Behavior During Backup

• System Services is not available.
• A partition with a label name SRVCNF is automatically created on the 

vFlash SD card to store the backup image file. If a partition with the label 

name SRVCNF already exists, it is overwritten.

• Takes up to 45 minutes depending on the server configuration.
• Takes a back up of everything; you cannot back up information for one 

device (for example, backup only LOM firmware and configuration).

• Does not back up diagnostics or driver pack information.

See Also:

Back Up Server Profile

Export Server Profile

Use this feature to export the backup image file on the vFlash SD card to a 

USB device or network share.

System or Feature Behavior during Export

• Takes up to 15 minutes depending on the server configuration.
• USC -LCE exports the backup image file in the 

DELLBR 

_<service_tag>_<time_stamp>.img

 format. The <service_tag> is 

copied from the backup image file name. The <time_stamp> is the time 

when the backup was initiated.

• After a successful export, the event is logged in the Lifecycle Log.

See Also

•

Exporting Server Profile to a USB Device or Network Share

•

Viewing Lifecycle Log History

Summary of Contents for USC





































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands