Dell USC, User Manual

Page: 82 / 132

82
USC and USC-LCE Operations
– Type - Indicates the type of card, SD (Secure Digital) or MMC
(MultiMediaCard).
– Write Protected - Indicates if the write-protect latch on the vFlash SD
card is set to on or off position.
• Initialize vFlash - This deletes all the existing partitions on vFlash SD
card.
NOTE:
You can only use 256 MB of memory space in non-Dell SD cards.
Enable or Disable vFlash
If set to Enabled , the vFlash SD card is configured as a virtual drive; it
appears in the BIOS boot order, allowing you to boot from the vFlash SD
card. If set to Disabled , virtual flash is not accessible.
To enable or disable vFlash SD card:
NOTE:
Ensure to set the write-protect latch on the vFlash SD card to Off position.
1 From the vFlash Media drop-down menu, select Enable or Disable .
2 Click Finish to apply the changes.
Initialize vFlash
The Initialize vFlash option is not available after you disable the vFlash SD card.
Click
Initialize vFlash
to erase all the data present on the vFlash SD card.
HII Advanced Configuration
To modify advanced settings using the
HII Advanced Configuration
:
1 In the left pane, select Hardware Configuration .
2
In the right pane, click
HII Advanced Configuration
.
3 Select the device you want to configure.
Depending on the configuration setting changes, the following message may
be displayed:
One or more of the settings requires a
reboot to be saved and activated. Do you want to
reboot now?
. You can select
No
and continue making additional
configuration changes or perform other tasks such as operating system
deployment. All changes are applied during the next system boot.