manualshive.com logo in svg

Dell USC, User Manual

Share
Download
Dell USC User Manual Download Page 119

Troubleshooting and Frequently Asked Questions

119

7

Can I update the drivers used by an installed operating system through 

USC or USC-LCE?

No. USC or USC-LCE only provides drivers that are required for operating 

system installation. To update the drivers used by an installed operating 

system, see your operating system’s help documentation.

8

Can I add my own drivers and firmware for updating USC or USC-LCE 

to a local USB device?

No. Only drivers and firmware downloaded from the 

Dell Server Updates 

DVD’s are supported. See 

Configuring a Local USB Device

 for more 

information.

9

Can I delete USC or USC-LCE?

No.

10

Can I use virtual media for the operating system media source during 

installation?

Yes. See the 

Integrated Dell Remote Access Controller 6 (iDRAC6) User’s 

Guide 

for your system’s iDRAC device for more information (available at 

support.dell.com/manuals

).

11

Can I use a virtual USB for my update repository? 

Yes. See the 

Integrated Dell Remote Access Controller 6 (iDRAC6) User’s 

Guide

 for your system’s iDRAC device for more information (available at 

support.dell.com/manuals

).

12

What is UEFI? With which version does USC or USC-LCE comply?

UEFI (Unified Extensible Firmware Interface) is a specification that 

details an interface for transitioning control from the pre-boot 

environment to the operating system. USC or USC-LCE complies with 

UEFI version 2.1. See 

www.uefi.org

 for more information.

Summary of Contents for USC





































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands