manualshive.com logo in svg

Dell USC, User Manual

Share
Download
Dell USC User Manual Download Page 22

22

Using USC or USC-LCE

Using USC for the First Time

When using USC for the first time, it is recommended that you run the 

wizards:

1

USC Settings 

— Run the wizard to change the language, keyboard, or 

network settings.

2

OS Deployment

 — Run to install the operating system.

3

Hardware Diagnostics

 — Run diagnostics-check regularly to maintain the 

system.

See Also:

USC and USC-LCE Features

Using USC-LCE for the First Time

When using USC-LCE for the first time, it is recommended that you run the 

following wizards:

1

USC Settings 

— Run the wizard only to change the language, keyboard, or 

network settings.

2

Platform Update

 — Apply updates.

See also:

•

Using USC Settings Wizard

•

Updating Platform

Using USC Settings Wizard

Use 

USC Settings

 wizard to specify the language, keyboard layout, and 

network settings for USC or USC-LCE only. This does not change system or 

other application settings.

Summary of Contents for USC





































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands