manualshive.com logo in svg

Dell USC, User Manual

Share
Download
Dell USC User Manual Download Page 26

26

USC and USC-LCE Features

Lifecycle Log

Lifecycle Controller provides the history of firmware changes of the related 

components installed on a managed node. The log contains the following:

• Firmware update history based on device, version, and date
• Events based on severity, category, and date
• User comments history based on date

 

NOTE: 

Lifecycle log is available even if the operating system is not installed on the 

system and is independent of the power state of the system.

Using this wizard, you can view, export, and add a work note to a log history.

See Also:

•

Viewing Lifecycle Log History

•

Exporting Lifecycle Log

•

Adding a Work Note to Lifecycle Log

USC-LCE Platform Update

Use the 

Platform Update

 wizard to:

• View the current versions of the installed applications and firmware.
• Display the list of available updates.
• Select the required updates, downloads (automatic), and apply the 

updates.
To ensure optimal system performance and avoid system failures, it is 

recommended that you download and apply updates on a regular basis.

Contact your IT administrator for the preferred method to access the updates 

in your organization. The IT administrator can provide the updates on any of 

the following locations or media:

• FTP  server
• Local USB device
•

Dell Server Updates

 DVD

• Network  share

Summary of Contents for USC





































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands