Dell USC, User Manual

Page: 80 / 132

80
USC and USC-LCE Operations
3
Click
RAID Configuration
to launch the wizard and do the following
tasks:
a
Select RAID Controller .
b
Select the non-RAID physical disks attached to the controller and
click
Next
to initialize them.
NOTE:
This step is not available if the controller has no non-RAID disks
attached to it.
CAUTION:
During initialization, all the data on the non-RAID disks are
deleted.
c
Select Advanced Wizard
d
Select Basic Settings
e
Advanced Wizard Only - Select Physical Disks
f
Advanced Wizard Only - Additional Settings
g
Advanced Wizard Only - Review Summary
Creating a Secure Virtual Disk on Series 7
Controller
NOTE:
The controller must be encrypted with a Local Key.
To create a secure virtual disk on series 7 controller, follow these steps:
1 In the left pane, click Hardware Configuration .
2 Select RAID Configuration and click Next .
The number of virtual disks present on every controller is displayed, along
with information on whether the virtual disk is secure.
3 Select the controller and click Next .
4 Select Advanced Wizard and click Next .
5 Select the required RAID level and click Next .
6 Select Self-encryption from the Encryption Capability drop-down. The
self-encryption disks (SEDs) are displayed.
7 Select the required physical disks and click Next .