48
USC and USC-LCE Operations
Performing Hardware Diagnostics
To perform hardware diagnostics:
1
To start the Hardware Diagnostics utility:
a
In the left pane of USC or USC-LCE, click
Hardware Diagnostics.
b
In the right pane, click
Run Hardware Diagnostics
. When the
diagnostics utility launches, follow the on-screen instructions.
2
To exit the Hardware Diagnostics utility, reboot the system and press
<F10>
to re-enter USC or USC-LCE.
When the tests are complete, results of the diagnostics tests are displayed on
the screen. To resolve the problems reported in the test results, search the
resolutions at
support.dell.com
.
See Also:
Installing Operating System
Prerequisites
• Optical DVD drive is connected.
• Hard disks must be connected. For PERC controllers, at least one physical
disk must be available for virtual disk creation.
Workflow
To install the operating system:
1
To launch USC/USC-LCE, boot your system and press the
<F10>
key
within 10 seconds after the Dell logo appears.
2
In the left pane, click
OS Deployment
.
3
In the right pane, click
Deploy OS
and select one of the following:
•
Go directly to OS Deployment
and click
Next
.
• Optional:
Configure RAID First
and click
Next
, if the system has a
RAID controller. See
Using Optional RAID Configuration
information
Summary of Contents for USC
