manualshive.com logo in svg

Dell USC, User Manual

Share
Download
Dell USC User Manual Download Page 84

84

USC and USC-LCE Operations

• Broadcom NetXtreme Gigabit Ethernet
• Broadcom 5709C NetXtreme II GigE
• Broadcom 5709C NetXtreme II GigE
• Broadcom 57710 NetXtreme II 10GigE
• Intel Ethernet X520 10 GBE Dual Port KX4-KR Mezz
• Broadcom 57712 (Dual Port) 10GigE 

Important

• You can configure only one NIC at a time.
• Integrated Broadcom NICs are controlled both by the BIOS and by 

settings stored on the device itself. As a result, the 

Boot Protocol

 field in 

the HII of integrated NICs has no effect; this setting is instead controlled 

by the BIOS on the 

Integrated Devices

 screen. To set integrated NICs to 

an iSCSI or PXE boot mode, select 

System BIOS Settings

, then select 

Integrated Devices

. On this screen, you will see a list of each embedded 

NIC—select the appropriate value: 

Enabled

 for no boot capability, 

Enabled with PXE

 to use the NIC for PXE boot, or 

Enabled with iSCSI

 

to use the NIC to boot from an iSCSI target.

Encrypting Unsecure Virtual Disks

Prerequisites

• Selected controller is security-capable
• Security capable virtual disks must be attached to the controller.
• Controller must be in Local Key encryption mode.

Summary of Contents for USC





































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands