Dell USC User Manual Download Page 79

Page: 79 / 132

USC and USC-LCE Operations

Configuring RAID using Software RAID

Use this feature to configure RAID if a PERC S100 controller on the

motherboard or a PERC S300 RAID controller card is present in the system.

If the software RAID option is selected, USC-LCE displays the physical disks

as Non-RAID disks or RAID-ready disks.

• Non-RAID disk — A single disk without any RAID properties. Needs

initialization to apply RAID levels.

• RAID-ready disk — The disk is initialized and a RAID level can be applied.

NOTE:

Linux and VMware operating systems cannot be installed using Software

RAID controllers (S100 and S300).

Prerequisites

• S100 controller

–

In Option ROM, change the SATA Controller option to RAID Mode.

–

Latest BIOS version must be installed. For more information on the

BIOS versions for different systems, see

USC-LCE Readme

NOTE:

If you have an older BIOS, you can configure RAID only through Option

ROM.

• S300 — Latest firmware version for S300 controller must be installed.

Workflow

To set up software RAID, do the following tasks:

In the left pane, click

Hardware Configuration

In the right pane, click

Configuration Wizards

Summary of Contents for USC





































































































































Search results

Summary of Contents for USC

Reviews:

Brands by name

Popular brands

Dell USC, User Manual

Search results

Summary of Contents for USC

Reviews:

Brands by name

Popular brands