manualshive.com logo in svg

Dell USC, User Manual

Share
Download
Dell USC User Manual Download Page 54

54

USC and USC-LCE Operations

Driver Extraction and Installation

See Also:

•

Driver Extraction

•

Rebooting System

Installing Drivers for RHEL 4.8 Operating System

To install the drivers:

1

Mount the USB device containing the operating system drivers labeled 

OEMDRV

. Use the following command to mount:

mkdir OEMDRV

mount /dev/sdc1 /mnt/OEMDRV

 

NOTE: 

Path to the operating system drivers on the OEMDRV drive:

/oemdrv/*.rpm

2

Use the following command to install the drivers:

rpm -Uvh *.rpm

Table 4-3.  Driver Extraction and Installation for Different Operating Systems

Operating System

Method of Extraction

Microsoft Windows operating 

system

The drivers are extracted to an internal USB drive 

named OEMDRV.

Red Hat Enterprise Linux 4.8 The drivers are extracted to OEMDRV under 

/oemdrv/*.rpm

. Manually install the extracted drivers 

after the installation is complete.

Summary of Contents for USC





































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands