manualshive.com logo in svg

Dell S6000-ON, Configuration Manual

Share
Download
Dell S6000-ON Configuration Manual Download Page 885

and store the Collected Data from SupportAssist in accordance with 

these terms.  You agree that the provision of SupportAssist may 

involve international transfers of data from you to Dell and/or 

to Dells affiliates, subcontractors or business partners.  When 

making such transfers, Dell shall ensure appropriate protection 

is in place to safeguard the Collected Data being transferred in 

connection with SupportAssist.  If you are downloading SupportAssist 

on behalf of a company or other legal entity, you are further 

certifying to Dell that you have appropriate authority to provide 

this consent on behalf of that entity.  If you do not consent to 

the collection, transmission and/or use of the Collected Data,

you may not download, install or otherwise use SupportAssist.

2.

Move to the SupportAssist Configuration mode, if the EULA has been accepted.
To manually configure SupportAssist, use the following set of configuration.

CONFIGURATION mode

support-assist

Dell(conf)#support-assist

Dell(conf-supportassist)#

3.

(Optional) Configure the contact information for the company.
SUPPORTASSIST mode

contact-company name {

company-name

}[

company-next-name

] ... [

company-next-

name

]

Dell(conf)#support-assist

Dell(conf-supportassist)#contact-company name test

Dell(conf-supportassist-cmpy-test)#

4.

(Optional) Configure the contact name for an individual.
SUPPORTASSIST mode

contact-person [first <

first-name

>] last <

last-name

>

Dell(conf)#support-assist

Dell(conf-supportassist)#contact-person first john last doe

Dell(conf-supportassist-pers-john_doe)#

5.

(Optional) Configure the name of the remote SupportAssist Server and move to SupportAssist Server 

mode.
SUPPORTASSIST mode

server 

server-name

Dell(conf)#support-assist

Dell(conf-supportassist)#server default

Dell(conf-supportassist-serv-default)#

You can configure a maximum of two servers:
• default server
• custom user configured server

6.

Enable all activities and servers for the SupportAssist service.
SUPPORTASSIST mode

SupportAssist

885

Summary of Contents for S6000-ON

























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands