manualshive.com logo in svg

Dell S6000-ON, Configuration Manual

Share
Download
Dell S6000-ON Configuration Manual Download Page 815

  no ip address

  switchport

  vlan-stack trunk

  no shutdown

Enable VLAN-Stacking for a VLAN

To enable VLAN-Stacking for a VLAN, use the following command.

• Enable VLAN-Stacking for the VLAN.

INTERFACE VLAN mode

vlan-stack compatible

Example of Viewing VLAN Stack Member Status

To display the status and members of a VLAN, use the 

show vlan

 command from EXEC Privilege mode. 

Members of a VLAN-Stacking-enabled VLAN are marked with an M in column Q.

Dell#show vlan

Codes: * - Default VLAN, G - GVRP VLANs

NUM  Status      Q Ports

* 1  Active      U Te 3/0-5,18/1

  2  Inactive

  3  Inactive

  4  Inactive

  5  Inactive

  6  Active      M Po1(Te 3/14-15/1)

                 M Te 3/13/1

Dell#

Configuring the Protocol Type Value for the Outer VLAN Tag

The tag protocol identifier (TPID) field of the S-Tag is user-configurable.

To set the S-Tag TPID, use the following command.

• Select a value for the S-Tag TPID.

CONFIGURATION mode

vlan-stack protocol-type

The default is 

9100

.

To display the S-Tag TPID for a VLAN, use the 

show running-config

 command from EXEC privilege 

mode. Dell Networking OS displays the S-Tag TPID only if it is a non-default value.

Configuring Dell Networking OS Options for Trunk Ports

802.1ad trunk ports may also be tagged members of a VLAN so that it can carry single and double-tagged 
traffic.
You can enable trunk ports to carry untagged, single-tagged, and double-tagged VLAN traffic by making 
the trunk port a hybrid port.
To configure trunk ports, use the following commands.

1.

Configure a trunk port to carry untagged, single-tagged, and double-tagged traffic by making it a 
hybrid port.

Service Provider Bridging

815

Summary of Contents for S6000-ON

























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands