Dell S6000-ON, Configuration Manual

Page: 74 / 1080

• Specify the directory for users using FTP to reach the system.
CONFIGURATION mode
ftp-server topdir dir
The default is the internal flash directory.
• Specify a user name for all FTP users and configure either a plain text or encrypted password.
CONFIGURATION mode
ftp-server username username password [ encryption-type ] password
Configure the following optional and required parameters:
–
username
: enter a text string.
–
encryption-type
: enter
0
for plain text or
7
for encrypted text.
–
password
: enter a text string.
NOTE: You cannot use the
change directory (cd)
command until you have configured
ftp-
server topdir
.
To view the FTP configuration, use the
show running-config ftp
command in EXEC privilege mode.
Configuring FTP Client Parameters
To configure FTP client parameters, use the following commands.
• Enter the following keywords and slot/port [ /subport ] or number information:
– For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet
then the slot/port/
subport information.
– For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE
then the slot/port information.
– For a Loopback interface, enter the keyword
loopback
then a number from 0 to 16383.
– For a port channel interface, enter the keywords
port-channel
then a number.
– For a VLAN interface, enter the keyword
vlan
then a number from 1 to 4094.
CONFIGURATION mode
ip ftp source-interface interface
• Configure a password.
CONFIGURATION mode
ip ftp password password
• Enter a username to use on the FTP client.
CONFIGURATION mode
ip ftp username name
To view the FTP configuration, use the
show running-config ftp
command in EXEC privilege mode,
as shown in the example for Enable FTP Server .
74
Management