manualshive.com logo in svg

Dell S6000-ON, Configuration Manual

Share
Download
Dell S6000-ON Configuration Manual Download Page 869

To configure and enable the interfaces for Layer 2, use the following command.

1.

If the interface has been assigned an IP address, remove it.
INTERFACE mode

no ip address

2.

Place the interface in Layer 2 mode.
INTERFACE

switchport

3.

Enable the interface.
INTERFACE mode

no shutdown

Example of the 

show config

 Command

To verify that an interface is in Layer 2 mode and enabled, use the 

show config

 command from 

INTERFACE mode.

Dell(conf-if-te-1/1/1)#show config

!

interface TenGigabitEthernet 1/1/1

  no ip address

  switchport

no shutdown

Dell(conf-if-te-1/1/1)#

Enabling Spanning Tree Protocol Globally

Enable the spanning tree protocol globally; it is not enabled by default.

When you enable STP, all physical, VLAN, and port-channel interfaces that are enabled and in Layer 2 

mode are automatically part of the Spanning Tree topology.

• Only one path from any bridge to any other bridge participating in STP is enabled.
• Bridges block a redundant path by disabling one of the link ports.

Spanning Tree Protocol (STP)

869

Summary of Contents for S6000-ON

























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands