manualshive.com logo in svg

Dell S6000-ON, Configuration Manual

Share
Download
Dell S6000-ON Configuration Manual Download Page 53

 4 drw-     8192 Mar 30 1919 10:31:04 CRASH_LOG_DIR

 5 drw-     8192 Mar 30 1919 10:31:04 NVTRACE_LOG_DIR

 6 drw-     8192 Mar 30 1919 10:31:04 CORE_DUMP_DIR

 7 d---     8192 Mar 30 1919 10:31:04 ADMIN_DIR

 8 -rw- 33059550 Jul 11 2007 17:49:46 FTOS-EF-7.4.2.0.bin

 9 -rw- 27674906 Jul 06 2007 00:20:24 FTOS-EF-4.7.4.302.bin

10 -rw- 27674906 Jul 06 2007 19:54:52 boot-image-FILE

11 drw-     8192 Jan 01 1980 00:18:28 diag

12 -rw-     7276 Jul 20 2007 01:52:40 startup-config.bak

13 -rw-     7341 Jul 20 2007 15:34:46 startup-config

14 -rw- 27674906 Jul 06 2007 19:52:22 boot-image

15 -rw- 27674906 Jul 06 2007 02:23:22 boot-flash

--More--

View Configuration Files

Configuration files have three commented lines at the beginning of the file, as shown in the following 

example, to help you track the last time any user made a change to the file, which user made the 

changes, and when the file was last saved to the startup-configuration.

In the running-configuration file, if there is a difference between the timestamp on the “Last 
configuration change” and “Startup-config last updated,” you have made changes that have not been 
saved and are preserved after a system reboot.

Example of the 

show running-config

 Command

Dell#show running-config

Current Configuration ...

! Version 9.4(0.0)

! Last configuration change at Tue Mar 11 21:33:56 2014 by admin

! Startup-config last updated at Tue Mar 11 12:11:00 2014 by default

!

<output truncated for brevity>

Managing the File System

The Dell Networking system can use the internal Flash, external Flash, or remote devices to store files.
The system stores files on the internal Flash by default but can be configured to store files elsewhere.

To view file system information, use the following command.

• View information about each file system.

EXEC Privilege mode

show file-systems

The output of the 

show file-systems

 command in the following example shows the total capacity, 

amount of free memory, file structure, media type, read/write privileges for each storage device in use.

Dell#show file-systems

Size(b)   Free(b)   Feature Type Flags Prefixes

520962048 213778432 dosFs2.0 USERFLASH rw flash:

127772672  21936128 dosFs2.0 USERFLASH rw slot0:

        -         -        - network   rw ftp:

        -         -        - network   rw tftp:

        -         -        - network   rw scp:

You can change the default file system so that file management commands apply to a particular device 
or memory.

Getting Started

53

Summary of Contents for S6000-ON

























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands