manualshive.com logo in svg

Dell S6000-ON, Configuration Manual

Share
Download
Dell S6000-ON Configuration Manual Download Page 536

Enabling LLDP

LLDP is enabled by default. Enable and disable LLDP globally or per interface. If you enable LLDP globally, 
all UP interfaces send periodic LLDPDUs.
To enable LLDP, use the following command.

1.

Enter Protocol LLDP mode.
CONFIGURATION or INTERFACE mode

protocol lldp

2.

Enable LLDP.
PROTOCOL LLDP mode

no disable

Disabling and Undoing LLDP

To disable or undo LLDP, use the following command.

• Disable LLDP globally or for an interface.

disable

To undo an LLDP configuration, precede the relevant command with the keyword 

no

.

Enabling LLDP on Management Ports

LLDP on management ports is enabled by default.

To enable LLDP on management ports, use the following command.

1.

Enter Protocol LLDP mode.
CONFIGURATION mode

protocol lldp

2.

Enable LLDP.
PROTOCOL LLDP mode

no disable

Disabling and Undoing LLDP on Management Ports

To disable or undo LLDP on management ports, use the following command.

1.

Enter Protocol LLDP mode.
CONFIGURATION mode.

protocol lldp

2.

Enter LLDP management-interface mode.
LLDP-MANAGEMENT-INTERFACE mode.

management-interface

536

Link Layer Discovery Protocol (LLDP)

Summary of Contents for S6000-ON

























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands