Dell S6000-ON, Configuration Manual

Page: 854 / 1080

myfilename
copyServerAddress.10 a 172.16.1.56 copyUserName.10 s mylogin copyUserPassword.
10 s mypass
Additional MIB Objects to View Copy Statistics
Dell Networking provides more MIB objects to view copy statistics, as shown in the following table.
Table 84. Additional MIB Objects for Copying Configuration Files via SNMP
MIB Object OID Values Description
copyState .
1.3.6.1.4.1.6027.3.5.1.1.1.
1.11
1= running
2 = successful
3 = failed
Specifies the state of the
copy operation.
copyTimeStarted .
1.3.6.1.4.1.6027.3.5.1.1.1.
1.12 Time value Specifies the point in the
up-time clock that the
copy operation started.
copyTimeCompleted .
1.3.6.1.4.1.6027.3.5.1.1.1.
1.13 Time value Specifies the point in the
up-time clock that the
copy operation
completed.
copyFailCause .
1.3.6.1.4.1.6027.3.5.1.1.1.
1.14
1 = bad filename
2 = copy in progress
3 = disk full
4 = file exists
5 = file not found
6 = timeout
7 = unknown
Specifies the reason the
copy request failed.
copyEntryRowStatus .
1.3.6.1.4.1.6027.3.5.1.1.1.
1.15 Row status Specifies the state of the
copy operation. Uses
CreateAndGo when you
are performing the copy.
The state is set to
active
when the copy is
completed.
Obtaining a Value for MIB Objects
To obtain a value for any of the MIB objects, use the following command.
• Get a copy-config MIB object value.
snmpset -v 2c -c public -m ./f10-copy-config.mib force10system-ip-address
[ OID.index | mib-object.index ]
854
Simple Network Management Protocol (SNMP)