Dell S6000-ON, Configuration Manual

Page: 849 / 1080

STRING: "REACHABLE: Syslog server
10.11.226.121 (port: 9140) is reachable"SNMPv2-SMI::enterprises.
6027.3.6.1.1.2.0 = INTEGER: 2
Following is the sample audit log message that other syslog servers that are reachable receive:
Oct 21 05:26:04: dv-fedgov-s4810-6: %EVL-6-REACHABLE:Syslog server
10.11.226.121 (port: 9140) is reachable
Copy Configuration Files Using SNMP
To do the following, use SNMP from a remote client.
• copy the running-config file to the startup-config file
• copy configuration files from the Dell Networking system to a server
• copy configuration files from a server to the Dell Networking system
You can perform all of these tasks using IPv4 or IPv6 addresses. The examples in this section use IPv4
addresses; however, you can substitute IPv6 addresses for the IPv4 addresses in all of the examples.
The following table lists the relevant MIBs for these functions are.
Table 83. MIB Objects for Copying Configuration Files via SNMP
MIB Object OID Object Values Description
copySrcFileType .
1.3.6.1.4.1.6027.3.5.1.1.1.
1.2
1 = Dell Networking OS
file
2 = running-config
3 = startup-config
Specifies the type of file
to copy from. The range
is:
• If copySrcFileType is
running-config or
startup-config, the
default
copySrcFileLocation
is flash.
• If copySrcFileType is
a binary file, you
must also specify
copySrcFileLocation
and
copySrcFileName.
copySrcFileLocation .
1.3.6.1.4.1.6027.3.5.1.1.1.
1.3
1 = flash
2 = slot0
3 = tftp
4 = ftp
5 = scp
6 = usbflash
Specifies the location of
source file.
• If
copySrcFileLocation
is FTP or SCP, you
must specify
copyServerAddress,
copyUserName, and
copyUserPassword.
copySrcFileName .
1.3.6.1.4.1.6027.3.5.1.1.1.
1.4 Path (if the file is not in
the current directory)
and filename. Specifies name of the
file.
• If
copySourceFileType
Simple Network Management Protocol (SNMP)
849