manualshive.com logo in svg

Dell S6000-ON, Configuration Manual

Share
Download
Dell S6000-ON Configuration Manual Download Page 844

Configuring Contact and Location Information using 

SNMP

You may configure system contact and location information from the Dell Networking system or from 
the management station using SNMP.
To configure system contact and location information from the Dell Networking system and from the 
management station using SNMP, use the following commands.

• (From a Dell Networking system) Identify the system manager along with this person’s contact 

information (for example, an email address or phone number).
CONFIGURATION mode

snmp-server contact 

text

You may use up to 55 characters.

The default is 

None

.

• (From a Dell Networking system) Identify the physical location of the system (for example, San Jose, 

350 Holger Way, 1st floor lab, rack A1-1).
CONFIGURATION mode

snmp-server location 

text

You may use up to 55 characters.

The default is 

None

.

• (From a management station) Identify the system manager along with this person’s contact 

information (for example, an email address or phone number).
CONFIGURATION mode

snmpset -v 

version

 -c 

community agent-ip sysContact.0 s “contact-info”

You may use up to 55 characters.

The default is 

None

.

• (From a management station) Identify the physical location of the system (for example, San Jose, 350 

Holger Way, 1st floor lab, rack A1-1).
CONFIGURATION mode

snmpset -v 

version

 -c 

community agent-ip sysLocation.0 s “location-info”

You may use up to 55 characters.

The default is 

None

.

844

Simple Network Management Protocol (SNMP)

Summary of Contents for S6000-ON

























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands