Dell S6000-ON, Configuration Manual

Page: 271 / 1080

Command Output
show interface port-type slot/port pfc
{summary | detail}
Displays the PFC configuration applied to ingress
traffic on an interface, including priorities and link
delay.
To clear PFC TLV counters, use the
clear pfc
counters interface port-type slot/port
command.
show interface port-type slot/port pfc
statistics
Displays counters for the PFC frames received and
transmitted (by dot1p priority class) on an interface.
show interface port-type slot/port ets
{summary | detail}
Displays the ETS configuration applied to egress
traffic on an interface, including priority groups
with priorities and bandwidth allocation.
To clear ETS TLV counters, enter the
clear ets
counters interface port-type slot/port
command.
show interface port-type slot/port DCBx
detail
Plays the DCBx configuration on an interface.
show stack-unit { 0-11 | all} stack
ports all pfc details
Displays the PFC configuration applied to ingress
traffic, including priorities and link delay.
show stack-unit { 0-11 | all} stack
ports all ets details
Displays the ETS configuration applied to ingress
traffic on stack-links, including priorities and link
delay.
Examples of the show Commands
The following example shows the
show dot1p-queue mapping
command.
Dell(conf)# show qos dot1p-queue-mapping
Dot1p Priority: 0 1 2 3 4 5 6 7
Queue : 0 0 0 1 2 3 3 3
The following example shows the
show dcb
command.
Dell# show dcb
stack-unit 2 port-set 0
DCB Status : Enabled
PFC Port Count : 56 (current), 56 (configured)
PFC Queue Count : 2 (current), 2 (configured)
The following example shows the
show qos priority-groups
command.
Dell#show qos priority-groups
priority-group ipc
priority-list 4
set-pgid 2
The following example shows the output of the
show qos dcb-map test
command.
Dell#show qos dcb-map test
-----------------------
State :Complete
PfcMode:ON
--------------------
PG:0 TSA:ETS BW:50 PFC:OFF
Data Center Bridging (DCB)
271