manualshive.com logo in svg

Dell S6000-ON, Configuration Manual

Share
Download
Dell S6000-ON Configuration Manual Download Page 489

EXEC Privilege mode

debug isis

• View information on all adjacency-related activity (for example, hello packets that are sent and 

received).
EXEC Privilege mode

debug isis adj-packets [

interface

]

To view specific information, enter the following optional parameter:
–

interface

: Enter the type of interface and slot/port information to view IS-IS information on that 

interface only.

• View information about IS-IS local update packets.

EXEC Privilege mode

debug isis local-updates [

interface

]

To view specific information, enter the following optional parameter:
–

interface

: Enter the type of interface and slot/port information to view IS-IS information on that 

interface only.

• View IS-IS SNP packets, include CSNPs and PSNPs.

EXEC Privilege mode

debug isis snp-packets [

interface

]

To view specific information, enter the following optional parameter:
–

interface

: Enter the type of interface and slot/port information to view IS-IS information on that 

interface only.

• View the events that triggered IS-IS shortest path first (SPF) events for debugging purposes.

EXEC Privilege mode

debug isis spf-triggers

• View sent and received LSPs.

EXEC Privilege mode

debug isis update-packets [

interface

]

To view specific information, enter the following optional parameter:
–

interface

: Enter the type of interface and slot/port information to view IS-IS information on that 

interface only.

Dell Networking OS displays debug messages on the console. To view which debugging commands are 
enabled, use the 

show debugging

 command in EXEC Privilege mode.

To disable a specific debug command, enter the keyword 

no

 then the 

debug

 command. For example, to 

disable debugging of IS-IS updates, use the 

no debug isis updates-packets

 command.

To disable all IS-IS debugging, use the 

no debug isis

 command.

To disable all debugging, use the 

undebug all

 command.

Intermediate System to Intermediate System

489

Summary of Contents for S6000-ON

























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands