Dell Precision 370 DHM User'S & Service Manual Download Page 5

Page: 5 / 182

Reference — Computer documentation, product specifications, and white papers

Service call status and

support history

Top technical issues for

my computer

Frequently asked

questions

File downloads

Details on my computer

configuration

Service contract for my

computer

Dell Premier Support Website — premiersupport.dell.com

The Dell Premier Support website is customized for corporate, government, and education

customers. This website may not be available in all regions.

How to use Windows XP

Documentation for my

computer

Documentation for

devices (such as a

modem)

Windows Help and Support Center

1. Click the

Start

button and click

Help and Support

2. Type a word or phrase that describes your problem and click the arrow icon.

3. Click the topic that describes your problem.

4. Follow the instructions on the screen.

How to use Linux

Email discussions with

Dell Precision and Linux

users

Additional information

regarding Linux and my

Dell Precision computer

Dell Supported Linux Sites

http://linux.dell.com

http://lists.us.dell.com/mailman/listinfo/linux-precision

http://docs.us.dell.com/docs/software/oslinux/

http://docs.us.dell.com/docs/software/OSRHEL3/

How to reinstall my

operating system

Operating System CD

The operating system is already installed on your computer. To reinstall your operating

system, use the

Operating System

CD. See your Precision

User's Guide

for instructions.

After you reinstall your operating system, use the

Drivers and Utilities

CD to reinstall

drivers for the devices that came with your computer.

Your operating system

product key

label is located on your computer.

NOTE:

The color of your CD varies based on the operating system you ordered.

Specifications

Microprocessor

Microprocessor type

Intel® Pentium

4 Processor with HT

Technology Extreme Edition

or Intel® Pentium

4 Processor with HT

Summary of Contents for Precision 370 DHM























































































































































































Search results

Summary of Contents for Precision 370 DHM

Reviews:

Related manuals for Precision 370 DHM

Brands by name

Popular brands

Dell Precision 370 DHM, User'S & Service Manual

Search results

Summary of Contents for Precision 370 DHM

Reviews:

Related manuals for Precision 370 DHM

Brands by name

Popular brands