Dell Precision 370 DHM User'S & Service Manual Download Page 131

Page: 131 / 182

1. Click the

Start

button, click

Control Panel

, and then click

Appearance and Themes

2. Under

Pick a task...

, click

Change the computer's theme

3. In the

Display Properties

window, select a theme from the

Theme

drop-down menu.

4. Click

Creating and Arranging Shortcuts

A shortcut is an icon on the desktop that provides quick access to programs, files, folders, and drives you might frequently

use.

Creating Shortcuts

1. Open Windows Explorer or My Computer and find the file, program, or drive for which you want to create a shortcut.

NOTE:

If you cannot see your desktop, minimize any open windows to make your desktop visible.

2. Right-click and drag the highlighted item to the Windows desktop.

3. Click

Create Shortcut(s) Here

in the pop-up menu.

You can double-click the shortcut icon that appears on your desktop to open the item.

Arranging Shortcuts

To move a shortcut, click and drag the shortcut to the desired location.

To arrange all the shortcut icons at one time:

1. Right-click an empty spot on the Windows desktop to display a pop-up menu.

2. Point to

Arrange Icons By

and click the option for the icon arrangement you prefer.

Desktop Cleanup Wizard

Your computer is set up to use the Desktop Cleanup Wizard to move programs that are not frequently used to a designated

folder 7 days after you first start your computer and every 60 days after that. The appearance of the

Start

menu changes as

programs are moved.

To turn off the Desktop Cleanup Wizard, perform the following steps.

NOTE:

You can run the Desktop Cleanup Wizard any time by clicking

Clean Desktop Now

under

Run Desktop

Cleanup Wizard every 60 days

1. Right-click an empty spot on the desktop and click

Properties

Summary of Contents for Precision 370 DHM























































































































































































Search results

Summary of Contents for Precision 370 DHM

Reviews:

Related manuals for Precision 370 DHM

Brands by name

Popular brands

Dell Precision 370 DHM, User'S & Service Manual

Search results

Summary of Contents for Precision 370 DHM

Reviews:

Related manuals for Precision 370 DHM

Brands by name

Popular brands