Dell PowerConnect 35 SERIES, User Manual

Page: 57 / 474

Configuring PowerConnect 3524/P and 3548/P
57
Configuring Security Passwords
The security passwords can be configured for the following services:
• Terminal
• Telnet
• SSH
• HTTP
• HTTPS
NOTE:
Passwords are user-defined.
NOTE:
When creating a user name, the default priority is 1, which allows access but not configuration rights.
A priority of 15 must be set to enable access and configuration rights to the device. Although user names can
be assigned privilege level 15 without a password, it is recommended to always assign a password. If there is no
specified password, privileged users can access the Web interface with any password.
NOTE:
Passwords can be secured by using password management commands to force aging-out of passwords,
or expiration of passwords. For more information, see "Security Management and Password Configuration" on
page 56.
Configuring an Initial Terminal Password
To configure an initial terminal password, enter the following commands:
console(config)# aaa authentication login default line
console(config)# aaa authentication enable default line
console(config)# line console
console(config-line)# login authentication default
console(config-line)# enable authentication default
console(config-line)# password george
• When initially logging on to a device through a terminal session, enter
george
at the password
prompt.
• When changing a device’s mode to enable, enter
george
at the password prompt.
Configuring an Initial Telnet Password
To configure an initial Telnet password, enter the following commands:
console(config)# aaa authentication login default line
console(config)# aaa authentication enable default line
console(config)# line telnet
console(config-line)# login authentication default