Dell PowerConnect 35 SERIES User Manual Download Page 79

Page: 79 / 474

Configuring System Information

Figure 6-2.

Asset

The

Asset

page contains the following fields:

•

System Name (0-159 Characters)

— Defines the user-defined device name.

•

System Contact (0-159 Characters)

— Indicates the name of the contact person.

•

System Location (0-159 Characters)

— The location where the system is currently running.

•

MAC Address

— Indicates the device MAC address.

•

Sys Object ID

— The vendor's authoritative identification of the network management subsystem

contained in the entity.

•

Date

— The current date. The format is day, month, year, for example, 15/FEB/07 is February 15, 2007.

•

Time

— Indicates the time. The format is hour, minute, second, for example, 20:12:21 is eight twelve

and twenty-one seconds in the evening.

•

System Up Time

— Specifies the amount of time since the last device reset. The system time is

displayed in the following format: Days, Hours, Minutes and Seconds. For example, 41 days, 2 hours,
22 minutes and 15 seconds.

Summary of Contents for PowerConnect 35 SERIES



























































































































































































































































































































































































































































































Search results

Summary of Contents for PowerConnect 35 SERIES

Reviews:

Related manuals for PowerConnect 35 SERIES

Brands by name

Popular brands

Dell PowerConnect 35 SERIES, User Manual

Search results

Summary of Contents for PowerConnect 35 SERIES

Reviews:

Related manuals for PowerConnect 35 SERIES

Brands by name

Popular brands